Covered copper tube ready Built for hot water and heating.

Temper Annealed Half hard Hard
6×1
8×1
10×1 x
12×1 x
14×1 x
15×1 x
16×1 x
18×1 x
22×1 x
28×1
32×1
35×1
40×1
42×1
42×1,2
52×1
54×1
54×1,2
54×1,5
64×2
76,1×2
88,9×2
108×2,5

Can be used

Radiant panels
Hot and cold drinking water

Product Coils
Designation R220
Minimum tensile strength (N/mm²) 220
Minimum elongation at break 40%
Characteristics Values
Alloy Cu DHP – CW024A
Standard ATEC 14/15-2136
NF certification no
linear thermal expansion coefficient 0,0166 mm/m.°C
Thermal conductivity à 20 °C = 364 W/m.°C
Absolute Roughness μ= 0,0015 mm
Carbone residues annealed ≤ 0,06 mg / dm²
Completely impermeable to gases, resistant to UV ray
Download the data

SMISOL®Flex : pre-insulated copper tube ready Built

SMISOL®Flex is covered with an insulating foam of polyethylene (PE), which reduces the transmission of noise, condensation and heat losses. The pre-insulated pipe ready Built SMISOL®Flex combines safety, comfort, economy and performance, reduces implementation time on site, avoiding the overcladding copper tube before installation. The sheath made cover office, it improves the thermal efficiency of the facilities, contributes to sound insulation by reducing the noise and vibration in the tubes.

The insulation of the pipe prevents condensation in sanitary distribution. The composition of the polyethylene foam sheath HCFC has been developed to avoid the spread of fire.