PVC covered copper tube, ideal for gas installations!

Temper Annealed Half hard Hard
6×1
8×1
10×1 x
12×1 x
14×1 x
15×1 x
16×1 x
18×1 x
22×1 x
28×1
32×1
35×1
40×1
42×1
42×1,2
52×1
54×1
54×1,2
54×1,5
64×2
76,1×2
88,9×2
108×2,5

Can be used

Hot and cold domestic water.
Distribution of natural gas and fuel, connection tank / boiler for LPG.
Installations requiring anti-condensation insulation, mechanical or chemical protection, or to meet a specific aesthetic needs.
Direct installation without cover for fluids with a temperature below 60 ° C

Product Coils
Designation R220
Minimum tensile strength (N/mm²) R250
Minimum elongation at break R290
Characteristics Values
Alloy Cu DHP – CW024A
Standard NF EN 13349
NF certification yes
linear thermal expansion coefficient 0,0166 mm/m.°C
Thermal conductivity à 20 °C = 364 W/m.°C
Absolute Roughness μ= 0,0015 mm
Carbone residues annealed ≤ 0,06 mg / dm²
Completely impermeable to gases, resistant to UV ray
Download the data

SMISOL Plus® : PVC covered copper tube, ideal for gas installations!

The SMISOL Plus® copper tube  is designed for domestic water and gas installations requiring mechanical or chemical protection. The SMISOL Plus® range complies with NF EN13349 standard and has the right to use the NF brand.
SMISOL Plus® is guaranteed for 30 years against pitting corrosion due to the presence of carbonaceous materials.
Copper is the main material used for gas installations within buildings. Copper tubes for gas installations are the same as those used for sanitary and heating distribution and are defined by NF EN1057 standard for bare tubes and NF EN13349 standard for covered tubes.